Castrol Edge Synthetic Motor Oil 5W-40 5 Quart.
- What kind of oil do I put in my 2011 BMW 328i?
- What oil do I use for my BMW 328i?
- What kind of oil goes in a 2011 BMW?
- How much oil does a 2011 BMW 328i take?
- Is Castrol 5W30 good for BMW?
- Should I use 5W30 or 5w40?
- Can I use any synthetic oil in my BMW?
- How often should I change my oil BMW 328i?
- What happens if I put 5w40 instead of 5w30?
- Can I put 5w40 in my BMW?
- What brand of oil does BMW recommend?
- Does BMW require special oil?
- What brand oil does BMW recommend?
- What is the best oil to use for BMW?
- Can I use any 5W-30 oil in my BMW?
- Videos
What kind of oil do I put in my 2011 BMW 328i?
5W-30
What oil do I use for my BMW 328i?
SAE 5W-30
What kind of oil goes in a 2011 BMW?
Viscosity
| Viscosity | All TEMPS….5W-30, 0W-30 |
|---|---|
| Capacity: | With filter 6.9 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…M12x1.5 – 19 ft/lbs Replace drain plug seal. |
How much oil does a 2011 BMW 328i take?
The 328i has a 3.0-liter 6-cylinder engine with a total oil capacity o
Is Castrol 5W30 good for BMW?
The change of preferred oil manufacturer came as a shock, mostly for the owners of the M50 family of BMW engines. Castrol Genuine 5W30 fully synthetic oil was the go-to pick for these motors. All the information available shows that the M50 family of engines loved this stuff to a fault.
Should I use 5W30 or 5w40?
5w30 can be used by different type of vehicles and in different range of temperatures, but is ideal for colder temperatures. 5w40 is often used in higher mileage engine sand performs better in warmer temperatures.
Can I use any synthetic oil in my BMW?
While you can put synthetic blends in BMWs, the conventional oil will counteract the performance of the synthetic and expedite the degradation of your engine. Furthermore, you will need to change the oil more frequently. With synthetic oil, you need to service it every 10,000 to 15,000 miles.
How often should I change my oil BMW 328i?
How often does a 2016 BMW 328i need an Oil Change? Synthetic oil usually should be changed every 7,500 – 10,000 miles. An oil change is one of the most primary and gigantic services for your car. BMW recommends getting your 2016 BMW 328i oil & filter changed every 3,000-5,000 miles for conventional oil.
What happens if I put 5w40 instead of 5w30?
In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
Can I put 5w40 in my BMW?
BMW says you can use an: 0w40, 0w30, 5w30 or a 5w40 LL-1 oil in the USA.
What brand of oil does BMW recommend?
The BMW branded lubricant formulations are based on Castrol EDGE, a leading full synthetic brand strengthened by Fluid Titanium Technology which increases film strength, reduces friction, and improves lubrication under the intense pressure of high output engines.
Does BMW require special oil?
That’s why BMW recommends the exclusive use of synthetic motor oils inside all BMW engines. Powered by such high-tech powerplants, a corner has been turned that dictates the use of stronger, longer-lasting fluids and lubricants than ever before.
What brand oil does BMW recommend?
BMW also recommends an oil change interval of 15,000 miles. The brands that BMW uses are the Mobil Full Synthetic 5W-30 High Mileage, Mobil 1 SAE 0W-40, Valvoline SynPower SAE 5W-30 or Castrol Syntec European Formula SAE 0W-30. BMW is recommending Shell/Pennzoil PurePlus Oils as their aftermarket oil since 2015.
What is the best oil to use for BMW?
Oil for most BMW passenger vehicles and SAVs:
Mobil 1 SAE 0W-40. Valvoline SynPower SAE 5W-30. Castrol Syntec European Formula SAE 0W-30. Beginning in 2015, BMW is recommending Shell/Pennzoil PurePlus Oils as their aftermarket oil.
Can I use any 5W-30 oil in my BMW?
The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines. It’s the only oil approved in the US for BMW’s turbo N20 N54 N55 engines, including the S55 engine in the 2015+ F80 M3/F82 M4. It can also be used in most MINI engines.
