Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)
- What type of oil does a 2016 BMW 528i take?
- How much oil does a 528i BMW take?
- Can you use 5W-30 oil in a BMW?
- What kind of oil does a BMW 2015 528i take?
- What kind of oil does a 2012 BMW 528i take?
- What brand oil does BMW use?
- Which oil is better 0w30 or 5W-30?
- Is 5W-30 oil the same as 0w30?
- What kind of oil does a 2013 BMW 528i Xdrive take?
- How much oil does a 2013 BMW 528i take?
- What oil do BMW dealers use?
- What’s the difference between 5w30 and 5w40?
- What happens if I put 5w40 instead of 5w30?
- Can I put 5w40 in my BMW?
- Videos
What type of oil does a 2016 BMW 528i take?
Viscosity
| Viscosity | All TEMPS….0W-20 |
|---|---|
| Capacity: | With filter 5.3 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…6 ft/lbs Replace oil drain plug. If the new oil drain plug does not latch after tightening to specified torque, the drain plug must be positioned so the latch mechanism is aligned. |
How much oil does a 528i BMW take?
Capacity: With filter 5.3 quarts. After refill check oil level.
Can you use 5W-30 oil in a BMW?
The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines. It’s the only oil approved in the US for BMW’s turbo N20 N54 N55 engines, including the S55 engine in the 2015+ F80 M3/F82 M4. It can also be used in most MINI engines.
What kind of oil does a BMW 2015 528i take?
Notes: OE Recommendation, Full synthetic. 5W-30.
What kind of oil does a 2012 BMW 528i take?
Castrol Edge Synthetic Motor Oil 5W-30 1 Quart.
What brand oil does BMW use?
Most BMW engine comes with a 5W-30 from the factory. BMW also recommends an oil change interval of 15,000 miles. The brands that BMW uses are the Mobil Full Synthetic 5W-30 High Mileage, Mobil 1 SAE 0W-40, Valvoline SynPower SAE 5W-30 or Castrol Syntec European Formula SAE 0W-30.
Which oil is better 0w30 or 5W-30?
0W30 is the ideal oil for your automobile during the winter, especially if you live in a state or country with a very cold temperature. 5W30 is ideal for a wide range of temperatures. Therefore, it can be used in hot and cold climates.
Is 5W-30 oil the same as 0w30?
0w30 is thinner than 5w30 so your car would probably consume it much quicker if you put that in. Flush the engine oil and put the correct oil in and see how you get on.
What kind of oil does a 2013 BMW 528i Xdrive take?
Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No. 881166)
How much oil does a 2013 BMW 528i take?
Capacity: With filter 5.3 quarts.
What oil do BMW dealers use?
BMW Dealers predominantly use BMW’s original Twin Power Turbo engine oil branded as BMW Advantec synthetic oil or Genuine BMW Engine. In 2015 BMW changed from Castrol Oil (British Petroleum) to Shell Oil for making its proprietory synthetic motor oil.
What’s the difference between 5w30 and 5w40?
5w30 has lower viscosity hence it is suitable to use in hot or lower temperatures. 5w40 has higher viscosity hence it is not suitable at all temperatures. 5w30 is a multi-graded oil which is suitable to use in lower temperature. 5w40 is crude oil which can be used in a vehicle which has unleaded and leaded gasoline.
What happens if I put 5w40 instead of 5w30?
In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
Can I put 5w40 in my BMW?
BMW says you can use an: 0w40, 0w30, 5w30 or a 5w40 LL-1 oil in the USA.
